[Skip to Content]
Concho Valley Door Inc. - Homepage
Concho Valley Door
610 Art Street
San Angelo, TX 76903
(325) 658-4146

Commercial Door Systems

 

 

  

 

Thermospan 125
Thermospan 125 spec sheet (PDF)  |  Brochure (PDF)

Wayne-Dalton's Thermospan® 125 doors feature continuous foamed-in-place polyurethane insulation and standard joint seal that provide an R-value of 10.79. At this price point, the construction provides a substantially higher thermal efficiency than industry standard polystyrene doors.

The Wayne-Dalton Thermospan Series doors are the only doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available.

Ideal for applications where energy efficiency is important, and competitive cost is essential, Wayne-Dalton's Thermospan 125 sectional door features a foamed-in-place polyurethane core firmly bonded to hot-dipped galvanized inner and outer skins.Integral roll-formed struts per section add rigidity and strength, making the Thermospan 125 suitable for commercial and industrial applications. The patented Thermospan design demonstrates that overhead doors need not be the weak link in an energy-efficient building.

 


 

Thermospan 150
Thermospan 150 spec sheet (PDF)  |  Brochure (PDF)

Wayne Dalton’s Thermospan® Model 150 polyurethane-insulated, sectional steel door provides excellent thermal efficiency. Featuring an R-value* of 14.16 (U-value* of .0706), the Thermospan® Model 150 is an excellent value when thermal efficiency is important, but strength, rigidity and durability can’t be compromised.

The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

 


 

Thermospan 200
Thermospan 200 spec sheet (PDF)  |  Brochure (PDF)

Wayne Dalton Thermospan® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.

The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

 


 

Thermospan 5150/5200 5150 | 5200 spec sheet (PDF)  |  Brochure (PDF)

Wayne Dalton’s ThermoMark™ Models 5150 and 5200 are the ideal choice if you’re looking for a commercial door that has a combination of strength and insulation, but also looks great on most buildings. Foamed-in-place polyurethane insulation helps improve thermal efficiency of a building a minimum, offering year round comfort while also helping to provide quieter door operation.

ThermoMark™ Models 5150 and 5200 are manufactured using our patented, continuous foamed-in-place technology, in which the polyurethane core is securely bonded to hot-dipped galvanized inner and outer skins. This process gives these doors outstanding thermal, strength, and bonding characteristics while creating a door that is significantly more efficient than conventional insulated steel doors. A designed-in joint seal also helps save energy by preventing air filtration.

Features such as the 18-gauge steel end caps give these doors increased rigidity, while the factory finished interior and exterior hot-dipped, galvanized skins make installation easier, add life to the door and provide greater durability. ThermoMark™ 5150 and 5200 also feature hardware plates at all fastener points to add durability and extend the life of the door.

These doors are offered in a wide array of colors and panel designs that give these doors the beauty and appeal of a residential door but meet the size and strength requirements needed for a commercial or industrial application.

 


 

Model 2400 Model 2400 spec sheet (PDF)  |  Brochure (PDF)

The Wayne-Dalton C-2400 steel sectional door, available in a variety of sizes, is an excellent value. Featuring nominal 24-gauge ribbed steel sections, the C-2400 is available with a number of lite and insulation options.

The Wayne-Dalton C-2400 door is designed and built to ensure an economical, trouble-free long life for moderate commercial use. Available with an embossed finish in white or brown or a white smooth finish, the exterior of the C-2400 features a ribbed surface for increased strength and added visual appeal. Unique box-stile design with full 2" thickness and 3" width, plus tongue-and-groove construction, add vertical stability and strength. The stiles are continuously bonded to the skin surface with high strength adhesive, resulting in the strongest possible unit.

 


 

Aluminum Full-View 451/452 451 | 452 spec sheet (PDF)  |  Brochure (PDF)

Wayne Dalton’s Aluminum Full-View doors are the preferred choice when visibility and light transmission are just as important as aesthetics. These doors are weather resistant and virtually maintenance free, and are ideal for commercial applications such as auto dealerships, car washes, and restaurant patios.

With a variety of finish and glass options, our Aluminum Full-View doors help create a pleasant interior environment while offering a warm and open look from the exterior.

 


 

Rolling Steel DS-200 Rolling Steel DS-200 spec sheet (PDF)  |  Brochure (PDF)

Our DS Series Roll-Up Sheet doors are designed to be versatile, durable and easy to operate. Each door in the DS Series is constructed of 26-gauge, galvanized steel and features automatic door stops, a steel axle to support the door curtain and counterbalance system and oil-tempered steel springs for smooth cycle performance. With a variety of colors, options and sizes to choose from, these doors will fit almost any commercial application.

Model DS-200 is perfect for commercial applications with openings up to 16’ wide by 16’ high, such as loading docks, outbuildings and large storage facilities. 14-gauge guides allow for easy installation to masonry or steel with no special preparation or overhead tracks needed.